Ivanhoe RFS Building Replacement
Tender ID: 444726
Tender Details
Tender Description
Generally this Project involves the construction of a new timber frame structure on steel stumps applied to a ‘greenfield site’ to the location shown.
Demolition and removal of the onsite RFS building will be undertaken completely by the Central Darling Shire Council. All existing services will be terminated and all natural soil is to be restored to previous levels as shown on the Project Drawings ready for immediate construction.
The 332 square metre building makes way for a new self-contained Multi-Services Office comprising of a main office building, attached triple carport, front verandah and a disabled access ramp.
Base construction includes galvanised steel stumps cast into concrete piers and generally set at 1800 mm centres in one direction and 1600 mm in the other. Very little ground undulation is involved directly under the building footprint with an average height of about 550 mm from natural ground to internal finished floor level.
Underfloor bearers of C150-19 and floor joists of C100-19 are constructed from galvanised pressed metal ‘cee’ sections either double or single respectively and continuous over three (3) or more spans. The floor membrane material is of ‘red’ tongue structural pine-board glued and screwed to floor joists at manufacturer’s recommended centres.
All external and internal walls are of ‘T2’ pinus set at 450 mm centres generally to coincide with pre-manufactured ‘multi-nail’ finke roof trusses set at 900 mm centres.
The roof pitch should match 18 degrees (double check before ordering truss units).
Internal wall and ceiling claddings of plasterboard is backed by R2.0 and R3.0 mineral fibre insulation respectively. All internal walls are also lined with insulation as required.
External claddings consist of 0.48 mm zincalume custom orb roof sheeting and ‘Hardies’ Axon 403933 cement fibre sheeting vertically to walls whilst eave soffits have been eliminated.
Provide all anti birds-roost detailing where shown and noted on the Project Drawings.
All claddings are backed by ‘sisilation 450’ sarking or similar building wrap.
Windows are selected key-locked powder-coat aluminium sliding units set in metric sizes and are fitted with powder-coat aluminium security mesh to each as required.
Paint finishes inside and out shall generally be as existing in colour, texture and extent.
The floor covering finishes shall be as selected ‘strip vinyl planks’.
Note 1:
Although this Tender/Specification/Work Schedule describes an insitu timber frame structure an off-site pre-constructed prefabricated transportable unit may be considered without prejudice subject to acceptable quality and price and all as verified and sanctioned by the Principal with NO deviation from this Specification allowed for material or content other than the system construction method.
Note 2:
Rural Fire Service (RFS) data and communication installations have been shown on Drawing 5 (sketched notes) and are to be installed by the RFS preferred contractor. They do not form part of this RFx and are included for information only.
Note 3:
Landscaping and on site carparking works do not form part of this RFx and are to be excluded from the contract.
Location
Category
Building & Facility Construction & Maintenance Services : Commercial & Industrial Construction Services : Formwork & Steel Fixing : Painting & Decorating : Partitions & Walls & Ceilings
Civil Construction Services : Demolition & Removal
Fire & Safety : Fire Protection Services